The CD-Series Sliding Vane Pumps are engineered for high-pressure operations, capable of handling up to 400 psi (27.6 bar). Designed for longevity and consistent performance, these pumps feature self-adjusting vanes, ensuring sustained pumping efficiency throughout their service life.
Returns & Refunds Policy
Warranty Against Defects
Original Products
Ships Worldwide
Dedicate Support
The CD-Series Sliding Vane Pumps are engineered for high-pressure operations, capable of handling up to 400 psi (27.6 bar). Designed for longevity and consistent performance, these pumps feature self-adjusting vanes, ensuring sustained pumping efficiency throughout their service life.
This makes the CD-Series pumps a reliable and efficient choice for demanding industrial and commercial fluid transfer applications.
Model | Inlet | Outlet | GPM | RPM | 50 PSI1 | 100 PSI1 | Maximum Differential Pressure | Maximum Working Pressure | Degrees °F2 | Approximate Shipping Weight |
---|---|---|---|---|---|---|---|---|---|---|
CDBN1021 | 3 in. | 3 in. | 190 | 780 | 10 | 20 | 125 PSI | 400 PSIG | 225 | 160 lbs. |
Model | Casing & Heads | Bearing Cap | Rotor | Shaft | Vane & Pushrods1 | Liner & End Plates | Rotating & Stationary Parts2 | O-Rings3 | Other O-Rings3 | Bearings (2 required) | Internal Relief Valve Spring |
---|---|---|---|---|---|---|---|---|---|---|---|
CDBN | Ductile Iron | Iron | Ductile Iron | Steel | Composite | Iron | Carbon vs. Ni Resist | Buna-N | Buna-N | Anti-Friction Roller | Cadmium Plated Steel |
Additionally, the pumps utilize a variety of elastomers for seals and O-rings, including:
Model | A Inlet |
B Outlet |
C | C11 | D | D1 | D21 | E | F | G | H | J | K | L | M | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CDBN1021 | 3 in. | 3 in. | 7.06 IN. (179 MM) | 0 | 7.19 in. (183 mm) | 5.5 in (140 mm) | 0 | 2 in. (51 mm) | 1.75 in. (44 mm) | 4.12 in. (105 mm) | 5.38 in. (137 mm) | 8.5 in. (216 mm) | 6.5 in. (165 mm) | 11.25 in. (286 mm) | 5.25 in. (133 mm) | 9.88 in. (251 mm) |
NOTE:For some models C1 and D2 will be 0. This denotes that the suction and/or discharge flange will be centered with the shaft.
Motor Options
Model # | Enclosure | HP | RPM | Volts | Hertz | Phase | Weight |
---|---|---|---|---|---|---|---|
6010-1C2B1 | Explosion Proof | 10 | 1800 | 230/460 | 60 | Three | 175 lbs. |
6010-1B2B1 | TEFC | 160 lbs. | |||||
6010-1D2B1 | Severe Duty TEFC | 160 lbs. | |||||
6010-1A2B1 | Open Drip Proof | 135 lbs. |
NOTE: Other Motor Options are available. Call us at 1-800-433-8831 to inquire additional models.
Mounting Options
Part Number | Description | Max Driver Size (HP) |
---|---|---|
101GRB- | Mounting set-up forDirect Drive Includessize "B" gear reducer, steel baseplate mounting, reducer bracket, couplings, and coupling guard. |
182T-254T |
103- | Mounting set-up forV-Belt Drive Includes steel baseplate mounting, adjustable motor slidebase, V-belt drive and enclosed beltguard. |
184T, 215T, or 256T |