M80A2 METER WITH REGISTER

*VITON® ELASTOMERS

M80P2 METER LESS REGISTER AND GEAR PLATE

M80S2 METER WITH POD (PULSE OUTPUT DEVICE)

To find the maximum meter flow rate in relation to the meter bearing material and product viscosity, use the chart below:

• Calculate the percentage of rated capacity that the meter must function at;
• Calculate the viscosity of the product at the operating temperature of the system.
• Plot the intersection of the two lines on the chart.
• Find the appropriate slope on the chart by identifying the meter-bearing material from the construction/application table above.

You are outside of the permitted pressure loss for the designated meter and bearing if the plotted point is higher than the bearing material slope. Either use a larger meter, lower the flow rate, or think about using other bearing materials.

• Flow Ratings:

  • 4″ Size:
    • Flow Rate: 2268 LPM (liters per minute)
    • Pressure: 275 psi (19 bar, 1900 kPa)
  • 6″ Size:
    • Flow Rate: 3,800 LPM
    • Pressure: 275 psi (19 bar, 1900 kPa)

• Flange Sizes:

  • Compatible with 4″ and 6″ flanges for connection.

• Material Construction:

  • Meter Body: Aluminum — Lightweight and corrosion-resistant.

• Seal Options:

  • Buna (Nitrile): Suitable for petroleum-based fluids.
  • Viton® (Fluorocarbon): Chemical- and temperature-resistant for more aggressive fluids.

• Pressure Rating:

  • Maximum: 275 psi (as listed in the catalog).

• Temperature Range:

  • -40° to 185° F (-40° to 85° C) — Suitable for extreme temperature environments.