Solutions
Contact us

Shopping Cart

Subtotal: $170.00

Wishlist

  1. Home
  2. Equipment
  3. Liquid Control
  4. Flow Meters
  5. Liquid Controls Flow Meters
  6. Liquid Controls MA Series Meters

Liquid Controls MA Series Meters

This MSAA120 — 6" LC Meter is designed for measuring liquid flow rates up to 3785 liters per minute (LPM).

CATEGORY: Flow Meters
BRAND: Liquid Control
TYPE: Equipment

Returns & Refunds Policy

Warranty Against Defects

Original Products

Ships Worldwide

Dedicate Support

The Liquid Controls (LC) MA-Series rotary motion positive displacement (PD) meters provide unmatched measurement accuracy for custody transfer of Liquefied Petroleum Gas (LPG). These meters feature a unique design that minimizes intrusion in the liquid flow stream and ensures a minimal pressure drop.

  • Low Pressure Drop

    • Operates efficiently under gravity flow or pump pressure.

  • Sustained Accuracy

    • No metal-to-metal contact inside the measuring chamber eliminates wear, ensuring:

      • Minimal deterioration in accuracy over time.

      • Fewer recalibrations.

      • Extended service life.

    • Conforms to NIST and International Weights and Measures accuracy standards.

  • Wide Temperature Range

    • Accurately meters products within a temperature range of -40°F (-40°C) to 160°F (71°C).

  • Wide Viscosity Range

    • Handles products with viscosities ranging from less than 30 SSU (1 centipoise) to 1,500,000 SSU (325,000 centipoise).

  • Maximum Adaptability

    • Right-angle design with options for stock or custom elbows and fittings provides superior mounting flexibility to meet diverse installation requirements.

  • Pressure Rating

    • Rated for operation up to 350 psi (21 BAR).

  • Strainers and Air Eliminators

    • Available for the inlet side to ensure optimal performance.

  • Valves

    • Selection of manual or solenoid-actuated valves for the meter outlet.

  • Registration and Printing Equipment

    • Mechanical and electronic registration systems along with optional printers.

Pressure Rating: 350psi / 21 BAR

Available Models Size Maximum Nominal Flow Rate
MA4 1-1/2″ 30 gpm / 113 L/min
MA5 2″ or 1-1/2″ 60 gpm / 227 L/min
MA7 2″ 100 gpm / 380 L/min
MA15 3″ 200 gpm / 757 L/min

 

  • Meter and rotors: Cast aluminum
  • Internal components: Aluminum, Ni-Resist
  • Seal materials: Buna-N
  • Bearings: Carbon

Liquid Controls M-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.

Class 1 Refined petroleum products, such as  leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, and ethylene glycol (antifreeze) and propylene glycol.  Also used on motor oils, crop oils and rotogravure ink at reduced rates of flow.
Class 2 Aviation gasoline and jet fuels
Class 3 Variety of products such as: liquid sugars, corn syrup, corn sweeteners, dextrose, fructose, sucrose maltose, lactose, corn oil, soy bean oil, cotton seed oil, coconut oil and shortening’s etc.
Class 4 Treated waters and certain solvents where no red metals are allowed.
Class 7 Chlorinated solvents such as: perchloroethylene, trichloroethylene, trichloroethane and methlyene chloride. Also used for general solvent service.
Class 8 Acid pH liquids such as: nitric, phosphoric, glacial acetic acids, citric (fruit juices) and vinegars.
Class 10 Liquefied petroleum gas (LPG)  including butane, isobutane, pentane, ethane, freons, and propane.
Class 12 Anhydrous ammonia (NH3).
Class 14 Crude oil. For heated and/or viscous liquids including animal fats, resins, #6 oil and non-abrasive asphalt emulsions.
Class 15 Oil or water based latex products, polyester resins, adhesives, herbicides, nitrogen fertilizers.
Class 16 General solvent metering service such as: methanol, toluene, xylene, naphtha, acetone, MEK, MIBK, and alcohols including ethanol (also 200-proof alcohol). Class 7 meters should be used if the
application involves the use of chlorinated solvents
Class 20 Batch process water meter service. May be used for solvents and other liquids compatible with brass.
Class 27 Alkaline pH liquids: latex products, adhesives, some liquid fertilizers (10-34-0).
Class 30 Herbicides such as  such as Aatrex, Atrazine, Bicep, Bladex, Dual, Lasso, Lasso ME, Treflan, Sutan, Sutazine, and Eradicane (requires PTFE seals).
Class 37 Sodium hydroxide (caustic) solutions, high sulfur crude oil (LACT and NOD), and other alkaline pH liquids  including non-abrasive asphalt emulsions, liquid feed (molasses) supplements, and some resins. Construction suitable for heated and/or viscous liquids.
Class 47 Mildly abrasive liquids.

 

How can we help you?

Request a call back
Download
Technical Support
Product Videos
Warranty & Returns
Frequently Asked Questions