MSAA30A1 METER WITH REGISTRATION

MSAA30P1 METER LESS REGISTER AND GEAR PLATE

MSAA30S1 METER WITH POD (PULSE OUTPUT DEVICE)

MSAA30A2

METER WITH REGISTER

MSAA30S2

MSAA30 METER WITH POD (PULSE OUTPUT DEVICE)

To find the maximum meter flow rate in relation to the meter bearing material and product viscosity, use the chart below:

• Calculate the percentage of rated capacity that the meter must function at;
• Calculate the viscosity of the product at the operating temperature of the system.
• Plot the intersection of the two lines on the chart.
• Find the appropriate slope on the chart by identifying the meter-bearing material from the construction/application table above.

You are outside of the permitted pressure loss for the designated meter and bearing if the plotted point is higher than the bearing material slope. Either use a larger meter, lower the flow rate, or think about using other bearing materials.

• Flow Rate (LPM):

  • Rated for 1325 Liters Per Minute (LPM), indicating the maximum flow capacity.

• Pressure Rating:

  • Rated at 285 psi (19.7 bar or 1965 kPa), specifying the maximum operating pressure it can handle.

• Flange Size:

  • Equipped with a 3-inch flange, which determines the connection size for piping systems.

• Construction Materials:

  • Steel Case: Provides durability and structural strength.
  • Aluminum Element: Lightweight internal components designed for efficient operation.

• Seals:

  • Options include Buna (Nitrile rubber) and Viton® (Fluoroelastomer).
  • Selection depends on chemical compatibility and temperature requirements.

• Maximum Pressure by Catalog Number:

  • Confirms that the 285 psi rating aligns with catalog specifications.

• Temperature Range:

  • Operates between -40° to 185° F (-40° to 85° C), making it suitable for diverse environments.

M30K16

METER WITH REGISTER + PRESET VALVE + PRESET + STRAINER + AIR ELIMINATOR

M30S16

METER WITH POD (PULSE OUTPUT DEVICE)

MSAA30S16

METER WITH POD (PULSE OUTPUT DEVICE)