MSAA40A1 METER WITH REGISTRATION

MSAA40S1 METER WITH POD (PULSE OUTPUT DEVICE)

To find the maximum meter flow rate in relation to the meter bearing material and product viscosity, use the chart below:

• Calculate the percentage of rated capacity that the meter must function at;
• Calculate the viscosity of the product at the operating temperature of the system.
• Plot the intersection of the two lines on the chart.
• Find the appropriate slope on the chart by identifying the meter-bearing material from the construction/application table above.

You are outside of the permitted pressure loss for the designated meter and bearing if the plotted point is higher than the bearing material slope. Either use a larger meter, lower the flow rate, or think about using other bearing materials.

• Flow Rate (LPM):

  • 1703 LPM (Liters Per Minute) – The maximum flow capacity the meter can handle.

• Pressure Rating:

  • 285 psi (19.7 bar, 1965 kPa) – The maximum operating pressure the meter can withstand.

• Flange Size:

  • 3″ – Indicates the diameter of the flange connection for piping integration.

• Construction Material:

  • Steel Case – Provides structural durability.
  • Aluminum Element – Internal components are made of aluminum, likely to ensure lightweight construction and corrosion resistance.

• Seals:

  • Buna/Viton® – Specifies the types of seals available based on catalog number:
    • Buna: Suitable for petroleum-based fluids.
    • Viton®: Resistant to chemicals and higher temperatures.

• Maximum Pressure:

  • 285 psi – Reiterates the highest pressure supported, depending on the specific catalog number configuration.

• Temperature Range:

  • -40° to 185° F – Specifies the operational temperature range, suitable for extreme environments.