Solutions
Contact us

Shopping Cart

Subtotal: $170.00

Wishlist

  1. Home
  2. Equipment
  3. Liquid Control
  4. Flow Meters
  5. Liquid Controls Flow Meters
  6. Liquid Controls MSAA75 - 4" LC Meter (2,650 LPM)

Liquid Controls MSAA75 - 4" LC Meter (2,650 LPM)

This MSAA75 — 4" LC Meter is designed for measuring liquid flow rates up to 2650 liters per minute (LPM).

CATEGORY: Flow Meters
BRAND: Liquid Control
TYPE: Equipment

Returns & Refunds Policy

Warranty Against Defects

Original Products

Ships Worldwide

Dedicate Support

Meter Classes Description Bearing Material
Class 1 Refined petroleum products *Ni-Resist
Class 14 Crude oil *Ni-Resist
Class 16 Alternative fuels and solvents Carbon

*carbon bearings are standard on some meter sizes of this class, please consult factory.

MSAA75A1 METER WITH REGISTRATION

CATALOG NUMBER

FLOW

UNIT OF MEASURE

SEALS

TEMP. COMP.

W&M APPROVAL

MECHANICAL REGISTRATION

MSAA75A1-MECH-NP#1

L-R

DEKALITRES

BUNA

N/A

OIML

  

MSAA75A1-MECH-NP#2

L-R

WH GAL

VITON®

N/A

NIST

MSAA75A1-MECH-WP#2*

R-L

WH GAL

BUNA

N/A

NIST

MSAA75AT1-MECH-WP#1**

L-R

DEKALITRES

VITON®

YES

OIML

*1000PPR PHOTOELECTRIC PULSER

**10PPR DRY REED PULSER

MSAA75S1 METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER

FLOW

UNIT OF MEASURE

SEALS

W&M APPROVAL

POD (PULSE OUTPUT DEVICE)

MSAA75S1-POD#1

L-R

DEKALITRES

BUNA

OIML

  

MSAA75S1-POD#2

L-R

WH GAL

VITON®

NIST

 

MSAA75A2 METER WITH REGISTER

CATALOG NUMBER

FLOW

PRESSURE

UNIT OF MEASURE

TEMP COMP.

SOFTWARE

W&M APPROVAL

LCR®-II REGISTRATION

MSAA75AT2-LCR2-I#1 (CL1, DIV1)

L-R

285

WH GAL

Y

SL200 ST200

NIST

  

MSAA75AT2-LCR2-I#2 (CL1, DIV1)

R-L

285

WH GAL

Y

SL200 ST200

NIST

MECHANICAL REGISTRATION

MSAA75AT2-MECH-NP#1

R-L

285

WH GAL

Y

N/A

NIST

  

MSAA75P2 METER LESS REGISTER AND GEAR PLATE

CATALOG NUMBER

FLOW

PRESSURE

UNIT OF MEASURE

W&M APPROVAL

LESS REGISTER AND GEAR PLATE

MSAA75P2-LRG#1

L-R

285

WH GAL

NIST

  

MSAA75P2-LRG#2

R-L

275

WH GAL

NIST

MSAA75S2 METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER

FLOW

PRESSURE

UNIT OF MEASURE

W&M APPROVAL

POD (PULSE OUTPUT DEVICE)

MSAA75S2-POD#1

L-R

285

WH GAL

NIST

  

 

MSAA75A14

METER WITH REGISTER WITH 4”, 150# ANSI RF FLANGE

CATALOG NUMBER

FLOW

UNIT OF MEASURE

SEAL

MECHANICAL REGISTRATION

MSAA75A14-MECH-NP#1

L-R

WH. GAL

VITON

  

 

MSAA75S16

METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER

FLOW

UNIT OF MEASURE

SEALS

W&M APPROVAL

  

POD (PULSE OUTPUT DEVICE)

MSAA75S16-POD#1

L-R

LITRES

VITON®

NIST

  

MSAA75S16-POD#1

L-R

LITRES

VITON®

CAN

  

 

To find the maximum meter flow rate in relation to the meter bearing material and product viscosity, use the chart below:

  • Calculate the percentage of rated capacity that the meter must function at;
  • Calculate the viscosity of the product at the operating temperature of the system.
  • Plot the intersection of the two lines on the chart.
  • Find the appropriate slope on the chart by identifying the meter-bearing material from the construction/application table above.

You are outside of the permitted pressure loss for the designated meter and bearing if the plotted point is higher than the bearing material slope. Either use a larger meter, lower the flow rate, or think about using other bearing materials.

  • Flow Rate (LPM):

    • 2650 LPM (Liters Per Minute) – The meter can handle a maximum flow rate of 2650 liters per minute.

  • Pressure Rating:

    • 285 psi (Pounds per Square Inch) – Maximum operating pressure is 285 psi.
    • Equivalent conversions:
      • 19.7 bar
      • 1965 kPa

  • Flange Size:

    • 4″ (4 inches) – The flange size indicates compatibility with 4-inch pipe fittings.

  • Construction Material:

    • Steel Case – The outer casing is made of steel, providing durability.
    • Aluminum Element – Internal elements are constructed of aluminum, likely for lightweight and corrosion resistance.

  • Seals:

    • Buna/Viton® – These materials are used for sealing.
      • Buna (Nitrile Rubber): Suitable for petroleum-based fluids.
      • Viton® (Fluoroelastomer): Suitable for high temperatures and chemical resistance.
    • Seal selection depends on the catalog number specified.

  • Maximum Pressure (again):

    • Reaffirmed as 285 psi, ensuring compatibility with the listed pressure rating.

  • Temperature Range:

    • -40° to 185° F (approximately -40° to 85° C) – Suitable for both cold and moderately high-temperature environments.

How can we help you?

Request a call back
Download
Technical Support
Product Videos
Warranty & Returns
Frequently Asked Questions