Solutions
Contact us

Shopping Cart

Subtotal: $170.00

Wishlist

  1. Home
  2. Equipment
  3. MP Pumps
  4. Pumps
  5. Centrifugal Pumps
  6. MP Pumps 2" x 2" Petroleum 8 Self Priming Centrifugal Pump

MP Pumps 2" x 2" Petroleum 8 Self Priming Centrifugal Pump

The MP Pumps 2" x 2" Petroleum 8 Self-Priming Centrifugal Pump is a versatile and efficient pump series designed for transferring a wide variety of fuels.

CATEGORY: Pumps
BRAND: MP Pumps
TYPE: Equipment

Returns & Refunds Policy

Warranty Against Defects

Original Products

Ships Worldwide

Dedicate Support

The MP Pumps 2" x 2" Petroleum 8 Self-Priming Centrifugal Pump is a versatile and efficient pump series designed for transferring a wide variety of fuels.

  • Self-Priming: Capable of lifting liquids up to 25 feet above their source.
  • Flow Rate: Up to 150 GPM.
  • Head Capacity: Up to 100 feet.
  • Standard Components:
    • Stainless steel (SS) drive sleeve.
    • Stainless steel (SS) fasteners.
    • Renewable wear plate.
    • Semi-open, dynamically balanced impeller.
  • Close Coupled: 56C or 145TC frame motors.
  • Gas Engine Mounts:
    • 5.5 HP engine.
    • 6.5 HP engine.
  • Hydraulic Motors:
    • .22 cu. in.
    • .37 cu. in.
    • .45 cu. in.
  • Pedestal Mounting: For belt drive applications.
  • PumPAK®: A pre-tested pump end that integrates with various drivers.
  • 5-Blade Impeller: For higher flow rates.
  • Explosion-Proof Configurations:
    • Class 1, Group D for hazardous locations (PG and PE models).

Item No Parts No Description QTY.
1 21242 Capscrew-5/16"-18x7/8" 8
2 21238 Lockwasher 5/16 14
3 35614 Suction Flanged D-2" NPT 1
4* 35609 Gasket Cork/Buna 2
5 35604 Housing Ductile 1
6 35615 Discharge Flange D-2" NPT 1
7* 22258 Wear Plate Aluminum 1
8 22655 Jam Nut - 5/8"-18 1
9 22293 Impeller C 5" DIA 1
10 30321 Stud - 5/16"-18x1.13" 6
11 21284 Hexnut - 5/16"-18 6
12* 35722 Gasket C-4433 1
13 35608 Adaptor Ductile 1
14 21251 Capscrew 3/8-16x7/8 4
15 21266 Lockwasher SS: 3/8 4
16 21237 Acorn Nut - 5/16"-18 2
17* 21248 Gasket - 1/2x5/16x1/16 2
18 21267 Pipe Plug SS 1/4 NPT 1
19 21249 Screw SS 5/16-18x1 2
20 25684 Drive Sleeve SS- 7/8 SL 1
21* 35610 Seal 1" T-2 Car/Sic/Vit 1
22 35613 Clamp B: 7/8 Sl 1
23 26027

El Mtr: 3-3 145TC 3450 230/460

Explosion Proof

 1

* Suggested replacement parts
**Compatiable for kerosene, Jet A/B & Gasoline

Item No Parts No Description QTY.
1 21242 Capscrew-5/16"-18x7/8" 8
2 21238 Lockwasher 5/16 18
3 35614 Suction Flanged D-2" NPT 1
4* 35609 Gasket Cork/Buna 2
5 35604 Housing Ductile 1
6 35615 Discharge Flange D-2" NPT 1
7 22655 Jam Nut - 5/8"-18 1
8 22293 Impeller C 5" DIA 1
9 30321 Stud - 5/16"-18x1.13" 6
10 21284 Hexnut - 5/16"-18 6
11* 35722 Gasket C-4433 1
12 35606 Adaptor Ductile 1
13 35612 Clamp B: 3/4 SL 1
14 22321 Woodruff key stl 1
15 21278 Capscrew 5/16"-24 x 0.88 4
16 26140 Pedestal C 1
17 21237 Acorn Nut - 5/16"-18 2
18* 21248 Gasket - 1/2 x 5/16 x 1/16 2
19 21267 Pipe Plug SS 1/4 NPT 1
20* 22258 Wear Plate Aluminum 1
21 21249 Screw SS 5/16-18x1 2
22 22286 Drive sleeve SS - 3/4 1
23* 35610 Seal 1" T-2 Car/Sic/Vit 1
24 26085

Shaft STL

 1
25 22300

Ball Bearing

 2
26 21695

Snap Ring

 1

* Suggested replacement parts
**Compatiable for kerosene, Jet A/B & Gasoline

Item No Parts No Description QTY.
1 21242 Capscrew-5/16"-18x7/8" 8
2 21238 Lockwasher 5/16 20
3 22387 Suction Flanged C-2" NPT 1
4* 35609 Gasket Cork/Buna 2
5 22251 Housing Cast 1
6 22311 Discharge Flange C-2" NPT 1
7 22655 Jam Nut - 5/8"-18 1
8 22293 Impeller C 5" DIA 1
9 37140 1/2" NPT pipe Plug ZPS 1
10 21267 Pipe Plug SS 1/4 NPT 1
11* 22260 Wear Plate Steel 1
12 37137 FHS Screw SS - 5/16-18 x .62 2
13 22286 Drive Sleeve SS- 3/4 1
14 30321 Stud - 5/16"-18x1.13" 6
15 21284 Hexnut SS- 5/16"-18 8
16* 25460 Seal 1" T-21 NRS 1
17* 35722 Gasket C -4433 1
18 22247 Adaptor Cast 1
19 23002 Clamp Assy SS: 3/4 SL  2
20 26141 Pedestal Assy C 1
21 21278 Capscrew - 5/16"-24 x 0.88 4
22* 37141 O Ring Viton - AS-568-149 1

* Suggested replacement parts
**Compatiable for diesel, bio-diesel & Fuel oil 

  1. PG Pumps:

    • Compatible Fuels: Gasoline, Kerosene, Avgas, Jet Fuel.
    • Impeller Material: Semi-open cast iron, optional aluminum.
    • Mounting Options: Explosion-proof, Class 1, Group D.

  2. PO Pumps:

    • Compatible Fuels: Biodiesel, Fuel Oil, Diesel.
    • Impeller Material: Semi-open cast iron.
    • Mounting Options: TEFC (Totally Enclosed Fan-Cooled).

  3. PE Pumps:

    • Compatible Fuels: Ethanol, E85.
    • Impeller Material: Semi-open cast iron, optional 316 stainless steel.
    • Mounting Options: Explosion-proof, Class 1, Group D.
  • Fuel transfer for gasoline, diesel, kerosene, biodiesel, jet fuel, and ethanol.
  • Situations requiring high suction lift (up to 25 feet).
  • Flexible installations with multiple motor and drive configurations.

How can we help you?

Request a call back
Download
Technical Support
Product Videos
Warranty & Returns
Frequently Asked Questions